Two Stage CA1 Bare Replacement Pump for Chicago Pneumatic, NAPA, and BelAir Reciprocating Compressors

SKU: 1312100706
Part #: 1312100706
Old price: $828.54
$745.00
Call to order 866-208-2797

Two Stage CA1 Bare Replacement Pump for Chicago Pneumatic, NAPA, and BelAir Reciprocating Compressors – 1312100706

The C1 bare compressor pump is a full cast iron reciprocating compressor pump. The internal factory part number for this pump is 1312100706 and may sometimes be shown as 1312-1007-06 or 1312 1007 06.

This pump includes a finned intercooler but does NOT include an air cooled aftercooler. The intercooler helps remove much of the heat displaced after the air is compressed in the low pressure piston. Disc and spring valves are utilized inside of the pump rather than reed or finger valves. Disc valves are more reliable and can be changed without pulling the entire pump apart. This pump is designed to displace 18cfm when paired with a 5hp motor and can displace 24cfm when paired with a 7.5hp motor.

The CA1 bare piston compressor pumps have been used on a wide variety of compressor manufacturers, including Chicago Pneumatic, Atlas Copco, Quincy, BelAir, ABAC, and NAPA air compressors.

The CA1 was used on the following BelAir compressors:

  • 418VE
  • 438VE
  • 4418V
  • 438V/4
  • 418VLE
  • 438VLE/4
  • 418VL
  • 438VL/4

 The C1 bare pump was used on the following Chicago Pneumatic piston compressors:

  • RCP-C1130G
  • RCP-C1330G
  • RCP-C1430G
  • RCPC581VS
  • RCPC583VS4
  • RCPC7581VS
  • RCPC7583VS4
  • RCPC581V
  • RCPC583V4
  • RCPC7581V
  • RCPC7583V

 1312100706 on the following NAPA air compressors

  • 82348VBTFF
  • 82348VATK
  • 82348VBT
  • 82348VBT460
  • 82348VBTFF460
California Residents: Prop 65 WARNINGS