Ingersoll-Rand 2340 Air Compressor Pump, 1.5-5-hp, 2 Stage

Ingersoll Rand 2340 Bare Piston Compressor Pump, Two-Stage, 3HP and 5hp

There are four piston rings for sealing compression and oil control. The taper faced compression ring and beveled oil scraper ring provide quick seating. Two, three-piece oil control rings maintain proper lubrication on cylinder wall. Precision honing used in conjunction with the ring stack up means low oil carryover. The 100% cast iron frame is designed to support the overhung crankshaft. Cylinders bolt directly to the cast iron frame. Frame is completely sealed yet allows for maximum accessibility. A unique overhung design supported by two heavy duty ball bearings with replaceable crankpin bushing. Entire shaft is balanced with an integral counterweight to insure smooth operation. Solid one-piece design. These simple, easy to maintain rods can be used only with an overhung crankshaft. Crankpin bushing inside the rod is precision ground requiring no alignment.

The Cylinders are 100% cast iron, separately cast and individually bolted to the frame in a V-type configuration. The cylinders are precision honed for low oil carryover. Radial fins on the cylinders help remove heat and ensure 360 degree cooling of the cylinders. There are four piston rings for sealing compression and oil control. The taper faced compression ring and beveled oil scraper ring provide quick seating. Two, three-piece oil control rings maintain proper lubrication on cylinder wall. Precision honing used in conjunction with the ring stack up means low oil carryover. The intercooler between stages is of finned copper tube construction to provide maximum cooling area. It is located directly in the flywheel air blast to remove the heat of compression between stages keeping running temperatures and power needs to a minimum, ensuring high air delivery for horsepower expended. The intercooler is provided with a relief valve to prevent over-pressurization. The filter has a durable canister with a dry type 10 micron inlet filter/silencer as standard. The valves are reliable, time proven finger valves are quick acting and made from premium grade stainless steel. Valve components are easily removable for maintenance.

This is a direct replacement for the Ingersoll Rand 2340L5, 2340N5, 2340F9, 2340CW and H2340.

The internal Ingersoll Rand part number for this pump is 18002394 which may be shown in your parts manual. It may also be displayed as 97332845

Technical Details

• Minium RPM: 700
• Maximum RPM: 1575
• Weight: 150 lb.
• Dimensions: 20" x 19" x 17"
• Inlet Size - 1"NPT
• Discharge Size - .5"NPT