Ingersoll Rand UP6-15CTAS-150 15HP Base Mount 150psi Rotary Screw Compressor with Dryer and Filters

SKU: UP6-15CTAS-150 BM
Part #: UP6-15CTAS-150 BM
Free shipping (Excludes Hawaii & Alaska)

Ingersoll Rand UP6-15CTAS-150 15HP Base Mount 150psi Rotary Screw Compressor with Dryer and Filters

The Ingersoll Rand UP6-15C TAS is a complete compressed air package. The Total Air System includes a rotary screw compressor, cycling air dryer, and filtration to remove dust and oil. The Ingersoll Rand Total Air System compressor reduces space, costs less to install, and delivers high quality compressed air.  Since this is a baseplate mounted compressor it can be tied into a separate air receiver tank at your facility.

Ingersoll Rand designed the package enclosure to reduce sound while allowing for easy access to parts and maintenance. The front door lifts off if required to provide easy access to all routine maintenance points. You can remove the side panel for easy access to the dryer and filter section.

The cabinet enclosure includes a panel pre filter. This filters the air prior to entering the air compressor. In addition to lengthening the life of the main air filter, it keeps dust and debris away from major components. 

A cycling refrigerated air dryer is pre-installed and removes 99.9% of all moisture from the compressed air. As an energy saving feature, the refrigerated air dryer cycles on and off with the compressor. This uses a special stainless steel heat exchanger to pre-cool the air when it enters the dryer and warm the air upon exit.

The integrated dryer uses eco friendly R-134a refrigerant. The micro channel condenser and thermal control includes a quick acting hot gas bypass. The high efficiency cyclone separator removes then removes condensed water after the evaporator. The automatic drain discharges all condensate from a single port on the back of the compressor.

Ingersoll Rand designed the speed, torque and operating characteristics to perfectly match the load of the compressor. IR also optimized the motor efficiency and power factor for the UP6-15C TAS compressor. The motor has a class F insulation and can operate in ambient conditions up to 104 degrees.

The Ingersoll Rand UP6 15cTAS 150 has been one of the most common rotary screw air compressors sold over the past decade. For good measure - the reliability, easy parts access and simple operation will set your facility up for success.

The air compressor operates on 208, 230 or 460 volt power. The default maximum pressure setting is 150psi. The UP6-15C is also available in 100psi or 125 psi variants. Voltage and pressure are preset at the factory prior to ordering.

Features and Benefits: Ingersoll Rand UP6 15CTAS-150 Base Mount

  • Total Air System: Ingersoll rand rotary screw air compressor with dryer and filters.
  • 150 psi max operating pressure for heavy duty tool use
  • Fewer connections and smart integration eliminate leaks and pressure drops, ensuring maximum reliability
  • Integrated cycling refrigerated air dryer
  • Pre-installed dual filtration: A general purpose filter removes dust and debris. A coalescing will remove oil and trace vapors.
  • Advanced, high-efficiency combination cooler with roof mount package exhaust enables easy ducting
  • Package pre-filter protects all main components and keep the internal cabinet clean.
  • Small footprint frees up valuable floor space and reduces installation costs
  • Simple diagnostics for ease-of-operation and reduced downtime
  • Premium Poly-V belt drive system minimizes belt stretching and increases air output
  • Pre filled with a PAG based full synthetic compressor lubricant
California Residents: Prop 65 WARNINGS
Products specifications
Duty Cycle100% Continuous Duty
Drive StyleBelt Drive
Integrated DryerYes
Sound Level69dBA
Connection Size3/4" NPT
CFM @ 150 PSI50
Horse Power15
Max Pressure (PSI)150
Voltage208/230/460 / Tri Voltage
ConfigurationBasemount with dryer
Dimensions41 x 29 x 36"H
Weight725 lbs