Ingersoll Rand 22872857 OEM Thermal Valve Rebuild Kit Assembly for IRN 20-40 HP

Ingersoll Rand 22872857 OEM Thermal Valve Rebuild Kit Assembly for IRN 20-40 HP

The Ingersoll Rand 22872857 thermal valve assembly is an OEM kit that includes all parts needed to rebuild the thermal valve on the Ingersoll Rand IRN 20-40HP range of rotary screw air compressors. The thermal valve actuator sits on the inside of the manifold connected to the side of the cooler.

Typically if your compressor is shutting down on a high temperature, the thermal valve needs to be replaced. It's common for this valve to be replaced every 2-3 years depending on run hours and operating conditions. This valve opens when the oil gets hot to let coolant flow through the cooler/radiator before the oil is sent back into the sump tank. Use this kit in place or IR 22596548.

The 22872857 thermal valve kit was used on the below Ingersoll Rand series of VSD compressors

• IRN 20
• IRN 25
• IRN 30
• IRN 40

This is an OEM thermal valve made from Ingersoll Rand