Ingersoll Rand 22505309 Pressure Switch

SKU: 22505309
Part #: 22505309
Availability: Low Stock
Ship to
Shipping Method
No shipping options
OEM Ingersoll Rand

Not sure which part you need?

Ingersoll Rand Replacement Pressure Switch for UP6 20-50 Compressors – 22505309

Replacement pressure switch for several Ingersoll Rand medium sized rotary screw air compressors. This was most popular on the UP6 series ranging from 20hp to 50hp. This pressure switch is pre-set from the factory to kick off at 115 psi and kick off at 125psi. This is an adjustable switch and the pressure may need to be adjusted after installation if your compressor is running at a higher pressure.

Many older UP6 compressors may show part # 54767173 in your parts book. Part # 54767173 supersedes to 22505309.

The pressure switch sits inside of the main panel near the electrical connections. There is a ¼” port used for the pressure sensor and a separate adapter port. This tells the compressor when to turn the compressor on or off when a rotary screw compressor is not running in constant run mode.

This pressure switch was used on the following air compressor models.

  • UP6-20-125 / UP6-20-125-TAS
  • UP6-25-125 / UP6-25-125-TAS
  • UP6-30-125 / UP6-30-125-TAS
  • UP6 40-125
  • UP6 50-125

This is an OEM switch manufactured by Ingersoll Rand / Danfoss. Please contact our parts department for confirmation that this item will work with your rotary screw compressor.

California Residents: Prop 65 WARNINGS