Powerex STSV1302 3 HP Oilless Scroll Air Compressor 230/1/60, 60 Gallon Vertical Tank, 8.8cfm

Powerex STSV1302 3 HP Oilless Scroll Air Compressor 230/1/60, 60 Gallon Vertical Tank, 8.8cfm

The Powerex STSV1302 is a 3hp oil free scroll air compressor mounted on a 60 gallon vertical air receiver. This is a single phase air compressor that runs on 230v/1/60hz power and is rated to displace 8.8cfm at 100psi.

The STSV1302 is mounted on a 60 gallon vertical receiver tank. The tank is equipped with a pressure gauge, safety relief valve, discharge shutoff valve and a receiver drain. The vertical receiver tank reduces floor space and provides increased installation flexibility. The larger tank results in less cycling of the compressor motor and more air available during peak demand. An air cooled aftercooler is included to lower the discharge temperature of the compressed air. This results in ~70% less moisture getting downstream. An electronic timer drain is installed on the receiver tank to automatically drain any condensate from the tank.

Powerex’s scroll tank mounted air compressors are perfect for any application where clean dry air is required. Scroll compressors are completely oil-less so there is no risk of oil or coolant contamination downstream – this means less maintenance required, less filtration is needed, and there is no need for oil-water separators – all resulting in a more environmentally friendly operation.

The Powerex Oilless Rotary Scroll Air Compressor has advanced scroll compressor technology through the development of a completely oilless unit. The Powerex Scroll Compressor offers a dynamically balanced air end which insures vibration-free operation. The rotary design permits a continuous 100% duty cycle. No oil separation, oil filtration, or inlet valves are required on the Powerex scroll compressor.

This model is available in 230v single phase power. A magnetic motor starter with overload protection is pre-installed prior to shipping and wired based on your buildings power.

Two pressure setpoints are available on the STSV1302 3hp compressor depending on your sites psi requirements. 116psi is the most common but this is also available in a 145psi configuration.

This compressor package is able to be configured in an array of different variants, including with pre-installed air treatment options and dryers. Please contact our sales department to help tailor a compressor specific to your needs.

This same compressor is also available in a horizontal receiver: See Powerex STS0302

Features

• 60 Gallon vertical ASME air receiver
• Scroll pump technology – 100% oil-less air compressor
• Less noise and vibration than comparable reciprocating piston compressors
• Easy installation that maximizes floor space
• Lower overall maintenance cost than oil-flooded systems
• UL listed magnetic starter
• UL508A listed control panel
• Manufactured in ISO 9001:2015 certified facilities
• SLAE03E bare scroll compressor airend