OEM Replacement V-Belt for Ingersoll Rand 7100E15-VP and 7100E15-P Reciprocating Air Compressors

OEM Replacement V-Belt for Ingersoll Rand 7100E15-VP and 7100E15-P Reciprocating Air Compressors - 95369351

95369351 is a belt that will work on the Ingersoll Rand 7100E15-VP value plus and 7100E15-P premium package air compressors that are paired with a 15hp motor. This is an OEM drive belt from Ingersoll Rand. Note that this belt will not work on the 7100E15-V value package model.

Note that most 7100E15-VP and 7100E15-P compressors required two belts, so you will need to purchase qty 2 when performing a complete belt change.

Checking belt tension should be done on a monthly basis depending on the compressor usage. A quick check to determine if adjustment is proper may be made by observing the slack side of the belt for a slight bow when the unit is in operation. If a slight bow is evident, the belt is usually adjusted satisfactorily. These should be proactively replaced on a 2 year basis to ensure the compressor runs optimally. Your belt should be replaced if you are hearing squeaking sounds coming from the back of the beltguard. A compressor that is not producing the same amount of airflow as it previously did may be a sign of a belt wear. Belt tensioning can be achieved by loosening the motor anchor screws, pushing the motor away from the pump, and retightening the motor anchor screws. The motor can be easily moved by placing a prying tool beneath it.