OEM Ingersoll Rand

Ingersoll Rand Hydraulic Oil Cooler Hose for UP6 5-15C

SKU: 24279127
Part #: 24279127
Ship to
Shipping Method
Estimated Delivery
No shipping options

Ingersoll Rand Replacement Hydraulic Oil Cooler Hose for UP6 5-15C – 24279127

This is a replacement oil hose that goes from the bottom of the sump to the thermal valve manifold on the Ingersoll Rand UP6 5hp thru 15hp rotary screw air compressors. This hose is used on all of the smaller UP6 series compressors 15hp and below manufactured between October of 2008 and February 2020. This hose sends oil from the bottom of the separator sump to the thermal valve, which in turn either redirects oil into either the cooler or back into the sump depending on the oil temperature.

For rotary compressors manufactured before October of 2018, this hose was shown as part # 85558898. This was a hydraulic style hose. The new part number for this is item # 24279127 which is a stainless steel hydraulic hose. If your parts manual shows the item # as 85558898, then purchasing 24279127 would be correct for your compressor. Although the hose looks different, this newer steel braided hose is a direct replacement and a more durable style than the old hydraulic hoses.

Ingersoll Rand recommends replacing this item every 8,000 hours of operation to ensure your UP6 rotary compressor does not leak oil.

This is an OEM hose manufactured by Ingersoll Rand. Please contact our parts department if you would like confirmation this item will work with your air compressor.