1312100722 OEM Replacement V-Belt for Chicago Pneumatic and NAPA Compressors

1312100722 OEM Replacement V-Belt for Chicago Pneumatic and NAPA Compressors

This 1312100722 belt will work on several models of the Chicago Pneumatic RCPC and NAPA cast iron air compressors. Note that most compressors required two belts so purchasing Qty 2 may be needed.

This is an OEM belt.

Checking belt tension should be done monthly depending on the compressor usage, especially if looseness is suspected. A quick check to determine if adjustment is proper may be made by observing the slack side of the belt for a slight bow when the unit is in operation. If a slight bow is evident, the belt is usually adjusted satisfactorily. These should be proactively replaced on a 2 year basis to ensure the compressor runs optimally. Your belt should be replaced if you are hearing squeaking sounds coming from the back of the beltguard. A compressor that is not producing the same amount of airflow as it previously did may be a sign of a belt wear. Belt tensioning can be achieved by loosening the motor anchor screws, pushing the motor away from the pump, and retightening the motor anchor screws. The motor can be easily moved by placing a prying tool beneath it.

The 1312100722 v-belt will work with the following models:

• Chicago Pneumatic RCPC7583VSC2
• Chicago Pneumatic RCPC7583VSC24
• Chicago Pneumatic RCPC7581VSC2
• Chicago Pneumatic RCPC7581VC2
• Chicago Pneumatic RCPC7583VC2
• Chicago Pneumatic RCPC7583VC24
• NAPA 82378VAT208
• NAPA 82378VAT
• NAPA 82378VATK
• NAPA 82378VATFF
• NAPA 82378VBT
• NAPA 82378VBTK
• NAPA 82378VBTFF
• NAPA 82378VBT460
• NAPA 82378VBTFF460
• NAPA 82378HAT208
• NAPA 82378HAT
• NAPA 82378HBT
• NAPA 82378HBT460
• NAPA 82379HAT208
• NAPA 82379HAT
• NAPA 82379HBT
• NAPA 82379HBT460
• NAPA 822379HAT208
• NAPA 822379HAT
• NAPA 822379HBT
• NAPA 822379HBT460