Ingersoll Rand DA85EC High Efficiency 50cfm Thermal Mass Cycling Refrigerated Dryer, 115V
The Ingersoll Rand DA85EC helps you to achieve maximum energy savings, while ensuring a continuous supply of dry, high-quality compressed air by using this high efficiency small cycling refrigerated dryer. It is designed to help users achieve optimal performance at a lower cost of ownership compared to non-cycling dryers.
Because the DA85EC is a cycling refrigerated air dryer, its refrigeration system automatically deactivates during periods of low load to reduce energy consumption. When operating at partial loads the dryer will use the energy previously stored in the gycol circuit, making it possible to shut down the refrigerant compressor and substantially save energy and costs.
The function of Ingersoll Rand’s cycling refrigerated air dryers is simple. Hot compressed air enters the aluminum heat exchanger where it is cooled down. The precooler/reheater makes use of the colder compressed air exiting counterflow from the condensate separator to cool the inlet air. The compressed air temperature is then further reduced as it passes through the refrigerant to air and glycol chiller. During these two stages almost all the oil and water vapor contained in the compressed air are condensed to liquid and successively separated from it in the condensate separator, then drained out by the automatic drain. The cold compressed air then re-enters the precooler/reheater where it is heated before exiting the dryer for use.
A microprocessor controller is pre-installed on the DA85EC air dryer. All adjustments and resets can be performed by using this controller, including the drain timer and maintenance reminders.
The DA85EC is rated to handle 50cfm @ 100psi. The internal Ingersoll Rand part number for this dryer is 47696381001. This model number may be displayed as DA85ECA100. The entire air dryer package operates on 110v/1ph/60hz power.
DA85EC Features and Benefits: