Ingersoll Rand 24730145 OEM Thermal Overload Relay, 15-45 Amps, by ABB for R11i

Ingersoll Rand 24730145 OEM Thermal Overload Relay, 15-45 Amps, by ABB for R11i

The Ingersoll Rand 24730145 overload relay is used primarily on the R11i 15hp rotary screw compressor from Ingersoll Rand. This will only work on the R11i's with the XE-50 controller. This is an OEM part manufactured by ABB and used by Ingersoll Rand. There is an automatic and manual reset button included. When in manual mode the reset must by physically pushed in after the thermal trips.

The thermal overload relay will trip and cut power to the motor if the amperage spikes, preventing damage to the motor and the compressor. This typically needs to be replaced if the overload is shutting down the compressor prematurely before the amp draw reaches the trip set point. For further information on trip values/times, please refer to the ABB data sheet 'Electronic overload relay EF19 and EF45'

This is an OEM part. Please contact us with your serial number for confirmation this item will work with your rotary screw air compressor.

ABB Part Number: EF45-45 
ABB Product ID: 1SAX221001R1102