Ingersoll Rand 24114068 XE-70 Microprocessor Controller for Rotary Screw

Ingersoll Rand 24114068 XE-70 Microprocessor Controller for Rotary Screw

The Ingersoll Rand XE-70 microprocessor controller was most commonly used as an upgraded option for the RS11, RS15, RS18 and RS22 rotary screw compressors. It was also used as an optional upgrade controller in lieu of the standard XE-50 used on the R4-11 series. 

The controller consists of the membrane and the LCD display. The membrane consists of five command keys (Start, Stop, Load, Unload, and Reset), four navigation keys (Up, Right, Left and Down), and an Edit mode selection key (Enter). These keys, in conjunction with the graphics display and the LED icons, make up the user interface to the compressor. 

Note this controller is the XE-70 and is NOT compatible with compressors that utilized the upgraded XE-70 ECO controller (part # 24114050). Please contact us with your compressor serial number for confirmation this part is correct for your air compressor. 

This is an OEM controller from Ingersoll Rand. Once installed you will need to program the PSI setpoints for your air compressor.