Chicago Pneumatic RCP-C7581VC2 7.5HP, 1PH, 230v, 80 Gallon Vertical Air Compressor

$6,553.89
$5,243.11
SKU: RCP-C7581VC2
Part #: RCP-C7581VC2
Call to order 866-203-2944

Chicago Pneumatic Premium Package RCP-C7581VC2 7.5hp, 230/1/60hz, 80 Gallon Vertical Air Compressor

If you are looking for the longest lasting and highest quality reciprocating compressor on the market, this is the compressor!

The Chicago Pneumatic RCP-C7581VC2 compressor utilizes a slow turning 4-piston pump. This compressor pump is normally paired with a 10hp motor but has been slowed down to run with a Baldor 7.5HP motor. This results in one of the quietest piston compressors available. This slow turning reciprocating pump generates less heat than other 7.5hp compressors, resulting in increased reliability/lifespan and less water in your compressor lines. Disc and spring valves are utilized inside of the pump rather than reed or finger valves. Disc valves are more reliable and can be changed without pulling the entire pump apart.

The Chicago Pneumatic RCP-C7581VC2 is a 7.5hp single phase air compressor on an 80 gallon receiver. The pump is pre-filled with oil and the compressor is "plug and play" - simply connect power to the compressor and it’s ready to run. This Chicago Pneumatic compressor is part of their "Iron Series" product line featuring an all cast iron pump with a 2 Year CP Secure Warranty with no additional purchase required.

This "Premium Package" air compressor also includes the following benefits:

  • Low Oil Level Switch - Internal oil level sensor that has been pre-wired to the motor starter. The low oil level switch will automatically shut the compressor off if the oil level is too low, preventing the pump from seizing.
  • Air Cooled Aftercooler - Pre mounted on the back of the beltguard, an air cooled aftercooler will cool the compressed air after it leaves the pump which removes approximately 70% of the water from your compressed air - sending less moisture and contaminants into your air piping.
  • Automatic tank drain - Automatically drains moisture from your air tank. This reduces the amount of water in your compressed air and helps prevent rust from corroding the inside of your compressor tank.

Standard Features

  • Solid Cast Iron Cylinders
  • Mounted and wired magnetic motor starter
  • Cast iron two stage pump intercooler
  • 80 gallon vertical air receiver, ASME certified
  • Baldor motor - single phase, 230v
  • Disc and spring valves - longer lasting than reed valves.
California Residents: Prop 65 WARNINGS
Products specifications
Part Number8090254650
Horse Power7.5
Max Pressure (PSI)175
Tank Size80 Gallons
CFM Range26-35
CFM @ 175 PSI27
Voltage230/1/60
PhaseSingle
Drive StyleBelt Drive