Chicago Pneumatic / Pneumatech / Quincy 1.0 micron 105 CFM Inline Replacement Filter Element 2258 2931 04
2258 2931 04 is a replacement general purpose inline filter element for the Chicago Pneumatic, Pneumatech and Quincy 105cfm filter housing. This part number is sometimes listed as 2258293104 or 2258-2931-04.
The actual part number stamped on the bottom of your old filter element may be shown as 1629 0543 04. If so, purchasing 2258 2931 04 is the correct item. Your housing may also state to use element replacement kit part # 2258 2901 14. 2258290114 supersedes to this item number 2258 2931 04.
This element will work with the follow air filter housings:
This item includes the internal replacement element with o-rings on the stem, an additional drain o-ring, and a replacement o-ring that goes around the filter housing to create a leak free seal. The factory recommends changing this filter out a minimum of once per year or every 4,000 operating hours, whichever occurs first. Replacing the element will ensure all dust is removed down to 1 micron and all oil vapors are removed down to .1 ppm (parts per million). By proactively changing the internal element, you will decrease the pressure drop going across the filter, therefore increasing your energy efficiency.
This is an OEM part made by Chicago Pneumatic and Pneumatech. This filter element was also used on several Atlas Copco and Quincy products. Please contact our parts department if you would like verification on which item is correct for your filter.
2258 2932 04
2258 2931 03
2258 2932 03