BEKO 4012057 QWIK-PURE 50 High-Efficiency Oil-Water Condensate Separator
The BEKO QwikPure 50 oil/water separator is designed to remove trace oil vapors from the condensate drained from compressed air piping via an air dryer, filters, or the receiver tank. The QwikPure 50 is most commonly used with air compressors 40hp and below, but this might vary depending on ambient temperatures, humidity and run hours. Please contact us for confirmation this will work with your air system.
The disposal of air compressor lubricant carryover in condensate is a concern, as is the variety of regulations across the country. Installation of an oil-water separator is simple. The oily condensate from each drain valve is individually piped to a depressurization chamber to reduce pressure to atmospheric. The clean water is then piped into an waste water drain. The separated oil is contained within the cartridge and/or held in a collection vessel for proper disposal.
The QWIK-PURE 50 was designed with decades of experience to work well with all lubricant types including Polyglycol to provide years of reliable service. The heart of any oil-water separator is the adsorption material used, which is why QWIK-PURE uses an advanced filling material that is extremely light, and not messy. QWIK-PURE cartridges may be disposed of normally and are safe for sanitary landfills because the oil is securely trapped in the adsorption material, and sealed. Easy, flexible installation with included multiple inlet options and lightweight filling cartridge with integrated handles makes service simple and clean.
4012057 is an OEM oil/water separator from BEKO.
Additional Product Information