Atlas Copco NEMA 4 CR5-CRS1-80V-IS-N4 5HP 460v Industrial Compressor 80 Gal 18cfm 175psi 2020041815

Atlas Copco NEMA 4 CR5-CRS1-80V-IS-N4 5HP 460v Industrial Compressor 80 Gal 18cfm 175psi 2020041815

The Atlas Copco CR5-CRS1-80V-IS-N4 is a 5HP industrial premium package reciprocating air compressor with NEMA 4 rated electrical controls. This compressor operates on 460v three phase power. The package is mounted on an 80-gallon vertical receiver, and delivers approximately 18 CFM with a maximum working pressure of 175 PSI. The industrial premium package includes a low oil level switch, automatic tank drain and air cooled beltguard aftercooler. 

Built as part of Atlas Copco’s CR Industrial Series, this compressor uses a cast-iron, splash-lubricated, two-stage pump engineered for durability, long service life, and steady performance in tougher operating environments.

The NEMA 4 model includes:

• NEMA 4 Pressure Switch: Protect against ingress of airborne particulates, protect against hose-down cleaning, protects against adverse weather conditions and is IP66 rated. 
• Totally Enclosed Fan Cooled Motor (TEFC): The TEFC motor prevents air from moving into the inside of the motor. The interior fan cools internal motor components and has sealed conduit from the motor. Note, TEFC motors are not completely air-tight or waterproof.

Atlas Copco 5HP NEMA4 CR5-CRS1-80V-IS-N4 460v/3phase Industrial compressor includes:

• Air cooled aftercooler pre-installed on the back of the beltguard. This cools the air prior to entering the receiver tank, which reduces the moisture content by about 70%.
• An automatic timed electronic drain then removes any water from the receiver tank automatically. An auto drain no longer requires you to stick your hand under the tank daily to remove moisture.
• A low oil level shutdown switch which turns off the motor if oil runs low in the pump, preventing the pump from seizing up.

The 80-gallon vertical tank gives this model a practical balance of air storage and floor-space efficiency. For customers who need a stationary compressor that can support air tools, tire service, light manufacturing tasks, paint prep, maintenance work, and general shop air needs, the CR5-CRS1-80V-IS-N4 460v three phase offers the advantages of an industrial-grade piston compressor without stepping up to a larger rotary screw package. Its high-pressure 175 PSI capability also makes it especially useful for applications where extra stored pressure can improve system flexibility and runtime between pump cycles

More dependable than ever with options for all applications, Atlas Copco’s CR piston air compressors is a winning combination of outstanding reliability matched with robust performance, even in the most demanding conditions.

***Note - This specific model is for a 460v powered compressor. This model is also available in 208v 3 phase and 230v 3 phase, please contact us for pricing and availability.

 Features and Benefits: CR5-CRS1-80V-IS-N4 Industrial NEMA 4 460v/3 phase Air Compressor 2020041815

• NEMA 4 rated pressure switch and motor starter
• Totally enclosed fan cooled (TEFC) main drive motor
• 460V / 3-phase power for commercial and industrial electrical setups
• 80-gallon vertical tank helps maximize air storage while saving floor space
• Cast-iron, two-stage, splash-lubricated pump built for durability and long service life
• Cooling fins on crankcase and finned intercooler
• Oversized flywheel for improved overall cooling and lower RPMS
• Magnetic motor starter with overload protection
• Air cooled beltguard aftercooler
• Low oil level pump shutdown switch
• Electronic automatic tank drain (115v)