Graco Discontinued HVLP Sprayers

Graco has been the industry leader in Fine Finish Sprayers for over 10 years. They have a wide range of equipment from regular HVLP sprayers to the FinishPro 390 & 395 Air-Assisted Airless Sprayers.

Graco High Volume Low Pressure Sprayers maximize performance and provide superior fine-finish results. These HVLP sprayers offer excellent gun control. They use high-performance turbines and an efficient filtration system to provide outstanding finish quality. The three most common Graco HVLP sprayers are the 2500, 3800, and 4900.

HVLP 7.0

  • Best for Dyes, inks, and non wiping stains, clear lacquer
  • Foam pre-filter protects main filter from large, incoming particles - easy to clean and replace
  • 7 PSI Rating
  • 3 State Turbine Power
  • Complete with the Edge Gun, 30' Hose, 1 Qt Cup, and #3 Fluid Set
Graco FinishPro HVLP 7.0 fine finish sprayer

HVLP 9.0

  • Best for automotive finishes, stains, epoxies, lacquers, enamels, urethanes and varnishes
  • More air flow and air pressure means higher production with less thinning
  • Industry Leading Dual Filtration System
  • Innovative gun design combines intuitive controls and improved performance
  • Complete with the Edge Gun, 30' Hose, 1 Qt Cup, and #3 & #4 Fluid Sets
Graco High Volume Low Pressure FinishPro 9.0

HVLP 9.5

  • Utility tool box stores all of your extra supplies
  • HVLP Edge gun provides intuitive controls and improved performance
  • No tool connection for the sprayer and gun
  • Includes the Artisan Air Valve Kit and 4' hose whip
  • More air flow and air pressure means higher production with less thinning
  • 5 Stage and 9.5 PSI Ratings
  • Complete with the Edge Gun, 30' Hose, 1 Qt Cup, and #2, #3 & #4 Fluid Sets
Graco FinishPro HVLP 9.5 5-stage finish sprayer

The Graco ProComp Pack Accessory attaches to any of the above HVLP sprayers. This allows you to upgrade at anytime without having to buy a whole new sprayer! The ProComp Pack includes; on-board compressor, 1 quart remote cup, 5' material & air hose and a shoulder strap.


HVLP 2500

  • Best for Dyes, inks, and non wiping stains
  • Portable, 2-Stage turbine
  • Foam prefilter protects main filters from large incoming particles
  • Quick disconnect with ball valve at gun
Graco HVLP 2500 finish sprayer

HVLP 3800

  • Best for automotive finishes, stains, epoxies, lacquers, enamels, urethanes and varnishes
  • Portable, three-stage turbine provides greater air output for heavier materials
  • Warning light indicates when filters need to be cleaned
  • Foam prefilter protects main filters from large incoming particles
  • Automotive-style main filter has large surface area for high cleaning efficiency, resulting in longer turbine life
  • Quick disconnect with ball valve at gun – no tools necessary
Graco 3800 HVLP finish sprayer

HVLP 4900

  • Best for industrial finishes, oil and wall paints, latex and multispec
  • Portable, four-stage turbine provides highest air output for the heaviest materials
  • Two-speed capability reduces turbine air flow allowing for better control with lighter materials
  • Warning light indicates when filters need to be cleaned
  • Foam pre-filter protects main filter from large, incoming particles - easy to clean and replace
  • Automotive-style main filter has large surface area for high cleaning efficiency, resulting in longer turbine life
  • Quick disconnect with ball valve at gun and at sprayer – no tools necessary

Graco Also produces the 3800 and 4900 ProComp, which have the same specifications as their counterpart, but feature an on-board compressor.

Graco HVLP 4900 finsih sprayer

Graco FinishPro 290, 390, 395

How it works: Material is delivered to the gun at lower pressure than traditional airless (500-1500 psi vs. 1500-3000 psi) and is partially atomized through a small tip. Full atomization is achieved by adding a small amount of air (5-35 psi) to the edges of the spray fan – resulting in a softer pattern, more control, higher transfer efficiency, and less overspray.

Benefits:

  • Fine finish quality that rivals HVLP
  • High production speed of airless
  • Ability to spray the widest range of fine finish materials – without reducing!
  • A full 8 air outlets instead of 4!

Graco’s Exclusive Air Cap Design

  • Revolutionary air cap design has been optimized for use with reversible spray tips
  • Twice the number of air outlets, each positioned closer to the spray tip
  • Delivers a softer, more consistent spray fan from start to finish

Premium G40 Spray Gun

Allows you to spray stains, enamels, varnishes, lacquers, sealers, and other finishing materials at lower pressures in air-assisted airless mode, resulting in an exceptional finish AND spray a full range of paints, primers, and other heavier materials in airless mode

  • Light-weight, compact design is ideal for getting into tight areas
  • Ultra-light trigger pull and form-fitted handle means less fatigue for the user
  • High Pressure Swivel for improved operator control and comfort
  • Closely aligned air and material hose porting and FlexCoil™ air hose provides increased flexibility while spraying
Graco FinishPro 390 air assisted airless finish sprayer
Graco FinishPro 395 air-assisted airless fine finish sprayer
Graco G40 air assisted airless fine finish spray gun
Navigation