Summit Syngear SH-7032 Synthetic Gear and Bearing Lubricant, ISO 32

SKU: Syngear SH-7032
Part #: Syngear SH-7032
Call to order 800-542-8300
Give us a call or click "Request for Quote" below for pricing or additional information

Summit Syngear SH-7032 Synthetic Gear and Bearing Lubricant, ISO 32

Summit Syngear SH-7032 is a premium ISO 32 synthetic gear and bearing lubricant formulated to provide maximum protection against wear, rust, corrosion and foaming, and
offers improved thermal and oxidation stability.

Summit Syngear® SH®-7000 Series synthetic gear lubricants are formulated using synthesized hydrocarbon fluid and select additives to en-hance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.  These PAO based fluids provide sig-nificantly better thermal and oxidation stability, as well as increased pro-tection against the loss of viscosity than do conventional good quality mineral oils. The inherently high viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher tempera-tures and lower viscosities for easy start-up and minimal internal friction at lower temperatures.  The low coefficient of friction of the Summit Syn-gear® SH®-7000 Series lubricants substantially reduces power consump-tion and gearbox operating temperature, further prolonging the useful life of the lubricant.

Summit Syngear SH-7000 Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bear-ings.  They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs. Summit Syngear SH-7032 may be used in piston or gear type pumps, expecially where pressures exceed 1000 psi or when operating over a wide temperature range.

The Summit Syngear SH-7032 lubricants are compatible with essentially all seal materials, plastics and paints, including nitrile Buna N, neoprene, viton, teflon, polyethylene, polyurethane ether, fluorocarbon, poly-acrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

Syngear SH-7032 gear oil is available in the following container sizes. Please contact us for pricing. The internal Summit product code for this item is 340150

  • 55 Gallon Drum
  • 330 Gallon Tote
  • 5 Gallon Pail
  • 1 Gallon Container (must order in quantities of 6)
  • 1 Quart Container (must order in quantities of 12)

Physical Properties - Syngear SH-7032

  • ISO Grade: 32
  • Specific Gravity: 0.844
  • Viscocity @ 40ºC: 31.6
  • Viscosity Index: 126
  • Flash Point, Fº: 475
  • Pour Point, Fº: -75
  • Copper Corrosion: 1A
  • Rust Test: Pass
  • FZG Gear Test: 11 Pass

Syngear SH-7032 will work great with the following lubricants and is cross-compatible:

Amsoil Inc.RCH
Anderol Inc.4032
Bel-Ray Company, Inc.SE2 -   32
C&C Oil Co.Duration R & O  32
Castrol Industrial div. BPAlphasyn T  32
D-A Lubricant Company, Inc.D-A Syn 5032
MobilSHC 624
Gulf Oil LPGulfSyn EHT  32
Jax, Inc.Syngear Ind Gear Oil  32
Kost USAAchievAL SynGear R&O  32
Levroil LLCLPL-G 8032
Petro-CanadaSynduro SHB  32
PulsafeederPulsalube #5
Royal Manufacturing Co, LPMonarch Syngear 860 (32)
Sentinel Lubricants Corp.S-75
Severus Inc. Div. of AmsoilGBC-  32
Sinclair Oil Corp.Dyno-Tech Synthetic R&O Turbine  32
SundyneGearbox Lubricant Recommendation
Tulco / Lubsoil2032 Synthetic R & O Gear Oil
TuthillPneuLube 32
Ultrachem, Inc.Chemlube 624
Ultrachem, Inc.Chemlube 724
California Residents: Prop 65 WARNINGS