Miscellaneous

Square D 9013FHG-42J59M1X Air Compressor Pressure Switch, 135-175psi, On off Lever and Unloader, .25"

Name: Square D 9013FHG-42J59M1X Air Compressor Pressure Switch, 135-175psi, On off Lever and Unloader, .25"
Brand: Miscellaneous
SKU: 9013FHG-42J59M1X
Price: 88.09 USD
Availability: InStock

$88.09

Part #: 9013FHG-42J59M1X

Low Stock

Qty:

Square D 9013FHG-42J59M1X Air Compressor Pressure Switch 135-175psi, On off Lever and Unloader, .25"

The 9013FHG-42J59M1X air compressor pressure switch is manufactured by Square D. This switch includes an on/off lever to control the air compressor. 9013FHG-42J59M1X is pre-set to turn on at 135psi and turn off at 175psi. An unloader line is pre-installed on the side of the pressure switch to relieve head pressure. This connects with a single 1/4" NPT female port.

9013FHG-42J59M1X is part of the Square D Nema Pressure Switches range. This air compressor pressure switch has 2 normally closed, snap action, DPST-DB (double pole single throw, double break) form YY contacts and off at 175psi pressure setting value. The pressure switch with a pressure sensor size of 200psi, an adjustable range on rising pressure of 100psi to 200psi and approximate fixed differential of 40psi. It is furnished with screw clamp terminals for electrical connection and 0.25inch NPSF internal for fluid connection. The enclosure is made of polypropylene. It is an IP20 and NEMA 1 rated. This product is certified by CE, CSA and UL. Meets UL 508 standards.

9013FHG-42J59M1X Specifications

Default factory pressure setting: 135-175psi
Minimum Close Cut In: 100psi
Maximum Open Cut Out: 200psi
Differential Range: 40psi
Motor HP Max on 115v - 1.5hp
Motor HP Max on 230v/1ph - 2hp
Rated for 1phase and 3 phase applications.

9013FHG-42J59M1X user benfits

Rugged, robust construction provides a long life and provides years of uninterrupted, worry-free service
Feature drift proof cut-in and cut-out settings
It has visible vertical contacts, easy to inspect without removal
An extra strong frame that resists distortion when mounting the switch to a compressor
Designed for the direct control of motors in compressor applications