Powerex AD1101 2HP (2x1HP) Climate Control Duplex Air Compressor, 6.8cfm, 30 Gal Tank, Single Phase

SKU: AD1101
Part #: AD1101
Call to order 866-203-2944

Powerex AD1101 2HP (2x1HP) Climate Control Duplex Air Compressor, 6.8cfm, 30 Gal Tank, Single Phase

The Powerex AD1101 duplex air compressor utilizes (2) 1hp compressor pumps to displace 6.8cfm. This climate control air compressor is mounted on a 30 gallon receiver and includes a pre installed and wired deluxe alternator. The AD1101 runs on single phase power.

The AD series air compressors from Powerex have been designed and tested to meet the most demanding specifications for low oil carryover and long life in the climate control industry. The package consists of two motor/compressor assemblies mounted on a single 30 gallon receiver tank. These are ideal reciprocating air compressors for instrumentation systems requiring and alternate compressor for standby or overload capacity. This style air compressor is desirable for a variety of reasons. When a duplex air compressor is alternated, the temperature of both compressors is kept above the ambient dew point to minimize moisture deterioration and corrosion. This still keeps temperatures low enough to prevent overheating on the motor and pump for increased life.

Powerex uses two of their LPS010A reciprocating pumps with the AD1101. This pump has precision honed cylinders and lap joint rings to provide the lowest oil carryover in the industry. The oil carryover rate is less than 2ppm which is the lowest you can achieve from an oil injected compressor. A fan type flywheel provides cooling across the pump fins to lower operating temperatures and increase the lifespan on your system. The motor is a 1750 RPM low speed motor. This generates less heat for an increased life as well. The motor pulley and pump flywheel are enclosed in an OSHA compliant beltguard.

The AD1101 can be pre-wired in either 115v or 230v single phase power prior to leaving the factory. The AD series duplex compressors are run through a factory break-in and are tested for air delivery, leakage and power consumption. The AD1101 is pre-shipped with a proper oil fill in the crankcase and ready to run.

Products specifications
Drive Style Belt Drive
Connection Size 3/4" NPT
Voltage 230/1/60, 115/1/60hz
Horse Power 2
Max Pressure (PSI) 100
CFM @ 100 PSI 6.8
Phase Single
Configuration Horizontal
Tank Size 30 Gallons
Dimensions 42 x 26 x 38"H
Weight 270 lbs