The Pneumatech PH 110 HE adsorption dryer has taken energy savings, reliability and productivity to the next level. The newest additions to the PH HE range offers the lowest total cost of ownership on the market for a regenerative/desiccant adsorption air dryer.
The new PH 110 HE adsorption dryer from Pneumatech offer all the benefits of desiccant dryers without any of the drawbacks. The secret is an innovative solid desiccant. In traditional desiccant dryers, the air flow is turbulent and unevenly distributed as the compressed air works its way through the tiny desiccant beads. These beads offer outstanding drying results that come at a cost: The process is not optimized in terms of energy efficiency and the beads slowly disintegrate. This creates a fine dust that can cause dryer failures and compromise your production.
With its straight desiccant tubes, the new PH HE adsorption dryer offers a much more efficient air flow and, therefore, major energy savings. Furthermore, solid desiccant disintegrates much more slowly and offers a 40% longer lifetime. That eliminates the aforementioned dust and makes desiccant maintenance much easier. If you were to just add up these benefits, you get an adsorption dryer with an industry-leading reliability and low cost of ownership.
Benefits of Solid desiccant
Installation has been made simple with the newer PH HE regenerative air dryers. The PH110HE includes two pre-dryer filters as standard. These filters remove dust/debris particles from the airstream prior to entering the dryer and will also remove oil vapors down to .01ppm. The dryer can also be installed either vertical or horizontal to aid with spacing and wall mounting kits are available.
The PH 110 HE is rated to 110cfm and the internal Pneumatech part number for this dryer is 8102357871
The PH110HE air dryer includes the Pneumatech PureLogicTM Touch controller which aides in optimizing the dryer performance in a user-friendly controller. Pressure dew point control drastically increases energy savings – the dryer only consumes purge air when the dew point reaches it’s setpoint rather than on a timer.
Benefits of the PureLogicTM Touch controller
PH 110 HE Features:
PH 65 HE
PH 135 HE
PH 180 HE
PH 220 HE
PH 90 HE