Pneumatech AD-1250 Non-Cycling 1250 cfm Refrigerated Air Dryer, 460v 3phase, 3"NPT

SKU: AD-1250
Part #: AD-1250
Call to order 866-208-2797

Pneumatech AD-1250 Non-Cycling 1250cfm Refrigerated Air Dryer, 460v 3 Phase, 3"NPT

The Pneumatech AD series of non-cycling air dryers is one of the most cost effective and reliable solutions to remove condensation and the resultant corrosion from your compressed air system. The AD-1250 dryer is a 1250 cfm air dryer and is typically paired with a 200hp+ rotary screw air compressor.

Refrigerated air dryers are one of the most common and effective ways to remove moisture and condensation from compressed air systems. Refrigerated dryers (aka fridge dryers) take the warm compressed air that is discharged from the air compressor and cools it rapidly to a 35-39ºF dew point. The cooling process lets the water vapors condense into a liquid which is drained out via the internal automatic drain, causing the air exiting the dryer to be very dry.

Without an air dryer, a significant amount of moisture can accumulate within a compressed air system. Depending on the end use equipment.

Refrigerated air dryers are a fantastic way to remove water from your lines, but often times pre and post dryer filtration are required. A general purpose pre filter will remove dust/debris from entering the dryer, therefore prolonging the life of the dryer. A coalescing oil removal filter can be installed after the air dryer to capture trace oil vapors down to .01ppm and will assist in removing trace water vapors that happen to escape past the dryer.

Do you have questions on compressed air treatment and what would be the most effective solution at removing water and/or containments from your system? Give our office a call and we are happy to assist.

The internal Pneumatech model number for this air dryer is 4102003072.

Pneumatech AD-1250 Standard Features

  • LED Readout of pressure dew point
  • Precise dewpoint control across a wide range of flows
  • Durable powder-coated cabinet
  • Integrated water separator
  • Environmentally safe refrigerants – no R22 is used
  • Integrated energy efficient no-loss drain
  • 460v / 3 Phase main power
  • Phase sequence relay
  • Remote alarm output
Products specifications
Max Pressure (PSI) 188
Voltage 460/3/60hz
Connection Size 3" NPT
Drain Type No-Loss Automatic Drain
CFM @ 100 PSI 1250
Refrigerant R410A
Voltage Frequency 60Hz
CFM Range 200-299, 1000+
Dimensions 45 x 40 x 61"
Weight 772 lbs