Ingersoll Rand VTR-E7.5 Oil Free 7.5hp Piston Air Compressor, 21cfm, 175psi, 230v 1Ph, 120 Gallon

Ingersoll Rand VTR-E7.5 Oil Free 7.5hp Piston Air Compressor, 21cfm, 175psi, 230v 1Ph, 120 Gallon 

The Ingersoll Rand VTR-E7.5 is a completely oil free 7.5hp piston air compressor that operates on 230v single phase power. This 7.5hp oil free air compressor is a two stage compressor and will displace 21.2cfm @ 175psi.

The VTR-E7.5 utilizes the VTR20 air compressor pump. This pump has a totally dry crankcase – no oil is used inside of the compression chamber. Therefore the risk of compressor lubricants getting downstream into your production is eliminated. The internal piston rings use an exclusive o-ring bumper to prevent axial movement of the guide rings.

This 7.5hp oil free compressor is mounted on a 120 gallon horizontal receiver tank. All components are mounted to a spring isolated base. This eliminates the need for additional vibration dampeners as the springs will absorb all vibration from the air compressor.

Since this is an industrial grade oil-free 7.5hp compressor, a motor starter is pre-installed on the outside of the enclosure. This provides full voltage control of the motor. An overload relay is included to protect the motor windings from temperatures rises and motor overloads due to voltage issues.

The entire VTR-E7.5 compressor assembly is contained in a semi-enclosed cabinet. This cabinet helps to reduce the noise level, increase cooling capacity and helps to protect against dust or debris contaminants.

Since oil free air compressors can run warmer than traditional air compressors, a large copper intercooler is pre-installed to reduce the heat load. The heat is further reduced by the oversized finned cylinders and grooves on the flywheel which flow cooling air across the pump.

To further reduce the heat and moisture load, an air cooled aftercooler is pre-installed on the system. The aftercooler on the VTR-E7.5 will remove about 60% of the moisture from the air lines. This moisture is then removed by a water separator.

The internal Ingersoll Rand CCN# for this air compressor is CISVWB02

Ingersoll Rand VTR-E7.5 - 230v 1 Phase Oil Free Air Compressor Features:

• 100% completely oil free air compressor
• Pre-installed motor starter with overload protection: 230v single phase
• Air cooled aftercooler for moisture removal with water separator
• 120 gallon horizontal air receiver
• Automatic start/stop control/pressure switch operation
• Sound reducing enclosure with dust protection
• Plated valve plates and reeds of highest grade steel extend operating life and durability.
• Cantilevered crankshaft design provides superior balance and long life.