Ingersoll Rand UP6S-20-125 20hp Rotary Screw Air Compressor, Base Mount/No Tank, 78 cfm@ 125psi

Ingersoll Rand UP6S-20-125 20hp Rotary Screw Air Compressor, Base Mount/No Tank, 78 cfm@ 125psi

The Ingersoll Rand UP6S-20-125 is their newest variation of their 20 hp rotary screw air compressor line. The UP6S-20-125 will displace 78cfm at 125psi. Since this is a baseplate mounted compressor, it can be tied into a separate air receiver tank at your facility.

Ingersoll Rand’s UP6S20-30 rotary screw air compressors are designed for total convenience. They are easy to install, simple to operate and will deliver rated compressed air with reliable efficiency.

The enclosure is designed to manage the environment of the internal components and the cooling ventilation system, while also significantly reducing the sound level emitted from the machine into the installation environment. The complete package is designed to be located on an adequate flat floor without any special foundations and will operate without imparting significant vibrations to the installation.

The standard compressor has an integrally mounted NEMA 1 starter box with a hinged door panel. It contains starter contactors, overload relays and all the components of the control circuit. The star-delta starter is used to reduce the current inrush on starting.

XS65 Microprocessor Controller:

The compressor is monitored, controlled and protected by an intuitive XS65 Series controller. The controller continuously monitors the status of the compressor and takes immediate action if an abnormal operating condition occurs. The Event Log is a comprehensive listing of the most recent occurrences with Event Code and Run Hours. The Event Log contains details on the last 100 "events" in order of occurrence.

• 2" Monochome Backlight LCD Display
• Page and Tabbed folders for ease of navigation.
• Multiple screens of compressor information and setup data.
• Status Bar with compressor state and Status Icons.
• Left/Right/Up/Down/Enter push

The UP6s-20 compressor is wired in either 208v/3ph, 230v/3ph or 460v/3ph power. The standard configuration is 125psi however this can be preset to run at 150psi if desired upon ordering. Since this is a baseplate model it needs to be paired with a separate air receiver tank.

Features and Benefits - UP6S-20-125:

• XS 65 Microprocessor Controller
• Service friendly design for easy maintenance
• Low Sound Enclosure with Dust Protection – 70dBA
• 100% Duty Cycle Operation
• Backed by a comprehensive suite of service programs and support networks