OEM Ingersoll Rand

Ingersoll Rand SS3 Piston Compressor OEM Replacement V-Belt

SKU: 95859112
Part #: 95859112
Ship to
Shipping Method
Estimated Delivery
No shipping options

Ingersoll Rand 95859112 OEM Replacement Belt for the SS3L3 Piston Air Compressor

This 95859112 belt will work on the Ingersoll Rand SS3 reciprocating air compressors. The full list of the complete model numbers is below, however it was most commonly used on the SS3L3 3hp IR compressor. This is an OEM belt from Ingersoll Rand.

Checking belt tension should be done monthly depending on the compressor usage, especially if looseness is suspected. A quick check to determine if tension is proper may be made by observing the slack side of the belt for a slight bow when the unit is in operation. If a slight bow is evident, the belt is usually adjusted to the correct tension. These should be proactively replaced on a 2 year basis to ensure the compressor runs optimally. Your belt should be replaced if you are hearing squeaking sounds coming from the back of the beltguard. A compressor that is not producing the same amount of airflow as it previously did may be a sign of a belt wear. Belt tensioning can be achieved by loosening the motor anchor screws, pushing the motor away from the pump, and retightening the motor anchor screws. The motor can be easily moved by placing a prying tool beneath it.

The 95859112 v-belt will work with the following Ingersoll Rand compressors:

  • SS3L3
  • SS3J3-WB
  • SS3J3-AS
  • 2340S9GH-AS
  • T10560V1