Ingersoll Rand MTOII-C5 5hp Oil Free Air Compressor, 15.6cfm @ 100psi, 230v 1ph, 60 Gallon Tank

Ingersoll Rand MTOII-C5 5hp Oil Free Air Compressor, 15.6cfm @ 100psi, 230v 1ph, 60 Gallon Tank

The Ingersoll Rand MTOII-C5 is a completely oil free 5hp piston air compressor that operates on 230v single phase power. This 5hp oil free air compressor is a single stage compressor and will displace 15.6cfm @ 100psi.

The MTOII-C5 utilizes the CCV50 oilless air compressor pump. This pump has a totally dry crankcase – no oil is used inside of the compression chamber. Therefore the risk of compressor lubricants getting downstream into your production is eliminated. The internal piston rings use an exclusive o-ring bumper to prevent axial movement of the guide rings.

This 5hp oil free compressor is mounted on a 60 gallon horizontal receiver tank. The receiver tank includes vibration isolators for underneath it's feet. This eliminates the need for additional dampeners or a spring dampening baseplate.

Since this is an industrial grade oil-free 3hp compressor, a motor starter is pre-installed on the outside of the enclosure. This provides full voltage control of the motor. An overload relay is included to protect the motor windings from temperatures rises and motor overloads due to voltage issues.

To further reduce the heat and moisture load, an air cooled aftercooler is pre-installed on the system. The aftercooler on the MTOII-C5 will remove about 60% of the moisture from the air lines. The moisture removed from the airline can then be drained via the receiver tank.

The internal Ingersoll Rand CCN# for this air compressor is CHSMOB14.

Ingersoll Rand MTOII Oilless Compressor Design Advantage

• Long lasting cast iron, hard chrome-plated cylinders. PTFE guide rings prevent the pistons from contact, raising efficiency. Sealed antifriction bearings in the upper and lower connecting rod ends for increased life.
• Cast iron heads and steel reed valves keep your compressor running cool and offer a longer operating life.
• Strong ductile iron crankshafts are mounted with sealed anti-friction bearings in a rugged cast iron crankcase.
• Large aluminum cooling fan and low compressor speeds keep the MTO II crankcase, cylinders and heads running cool, reducing wear and increasing the life of the unit.

Ingersoll Rand MTOII-C5 - 230v 5hp Oil Free Air Compressor Features:

• 100% completely oil free air compressor
• Pre-installed motor starter with overload protection: 230v single phase
• Air cooled aftercooler for moisture removal
• 60 gallon horizontal air receiver
• Automatic start/stop control/pressure switch operation
• Designed with serviceability in mind to provide easy access to user-maintained components 
• Cantilevered crankshaft design provides superior balance and long life.