***If you are looking for the same air dryer in a more energy efficient version, we recommend the DA55IM with Energy Management System Purge Control to reduce the amount of compressed air that is consumed.***
The Ingersoll Rand DA55IM without purge control is a modular desiccant dryer that is designed to provide a steady -40ºF dew point. This is ideal for point-of-use applications so you only pay to dry the air required for your operation. The dryer delivers an ISO Class 2 dew point to help prevent corrosion, minimize production disruptions and losses due to moisture or contamination.
Ingersoll Rand’s DA heatless desiccant dryers are designed to adsorb moisture from compressed air. The DA dryers are constructed with two towers that alternate between online (drying) and offline (regenerating modes) in order to yield a continuous stream of dry air at the dryer’s outlet. Each tower contains desiccant beads. During normal operation, wet air passes through the online tower and water vapor from the air is adsorbed (collected) on the desiccant beads. While air is being adsorbed in the online tower, the moisture on the desiccant in the offline tower is removed by a process called desorption (regeneration). After an initial rapid depressurization, a portion of dried air from the online tower passes over the desiccant bed and carries the moisture off the bed and out the dryer’s exhaust.
The DA55IM is rated to 32cfm. The internal Ingersoll Rand part number for this dryer is 47675077001. The entire air dryer package operates on 110v/1ph/60hz power.
DA55IM w/out EMS Features and Benefits:
DA55IM
ACC 35
PH 45 HE
DA40IM
47675076001