Ingersoll Rand 2545QE10 10hp Quiet Enclosed Piston Compressor, 35 cfm, 120 Gal Tank, 200v/3ph

$11,177.00
$8,399.99
SKU: 2545QE10 200v
Part #: 2545QE10 200v

Ingersoll Rand 2545QE10 10hp Quiet Enclosed Piston Compressor, 35 cfm, 120 Gal Tank, 200v/3ph

The Ingersoll Rand 2545QE10 is a 10hp quiet enclosed reciprocating air compressor that produces 35cfm @ 175psi. This is the best quiet air compressor on the market and operates on 200v 3 phase power. This ultra quiet industrial air compressor is enclosed in a noise reducing cabinet that operates at 65dBA.  

Ingersoll Rand’s 2545QE10 quiet air compressors are mounted inside of an enclosure. The panels are insulated and has internal ducting for the inlet and outlet air. Vibrations from the pump and motor are isolated from the package with vibration isolators. This results in low stresses on the tank and low vibration of external panels.

The sound package includes an axial fan on the side of the compressor. This fan draws in cooler ambient air from the bottom side of the cabinet. The fan then forces cooling air across the motor and pump. This reduces the heat load, which is then exhausted through the opposite end of the cabinet.

A high air temperature switch (HAT Switch) constantly monitors the internal system temperature.  In the event of high air temperatures, the switch automatically shuts down the compressor to prevent damage to the system.

The ultra quiet air compressor package is mounted on a 120 gallon horizontal air receiver. The receiver is ASME National Board coded. Also installed is a discharge check valve, pressure gauge, moisture drain valve, outlet service valve, and safety relief valve.

The heart of this 2 stage 10hp piston air compressor is the pump. Industries have used the Ingersoll Rand 2545 air compressor pump for decades because of its quality and reliability. The 2545 is a 100% cast iron design and does not use aluminum heads or body.

The V-block design improves cooling around the cylinders for longer life and lower operating temperatures. A finned style intercooler connects each cylinder. This reduces the operating temperature of the air between the first stage and second stage of the pump. Reliable stainless steel reed valves optimized for increased volumetric efficiency and precision-balanced overhung crankshaft runs smoothly and quietly.

The deluxe series magnetic motor starter comes pre-installed and is wired to the pressure switch and motor. NEMA 1 Deluxe starters provide full voltage control of electric motors. The NEMA 1 starter enclosure includes a manual reset button, on/off switch, 120 volt control transformer, and overload relays for overload protection. The fused control circuit complies with National Electric Code (UL & CSA approved).

The IR 2545QE10 10hp silent air compressor also includes the below items pre-installed on the compressor:

  • Air cooled aftercooler pre-installed on the back of the beltguard. This cools the air prior to entering the receiver tank, which reduces the moisture content by about 70%.
  • An automatic timed electronic drain then removes any water from the receiver tank automatically. An auto drain no longer requires you to stick your hand under the tank daily to remove moisture.
  • A low oil level shutdown switch installed on the face of the pump. This send a signal to turn off the motor if oil runs low in the pump, preventing the pump from seizing up.

Purchasing the 32305898 startup kit at the same time as the compressor will give you an additional year warranty on the pump. Each start-up kits contains all the parts needed to correctly start up and maintain the compressor for the first year of operation. 32305898 includes All Season Select lubricant, filter elements, MSDS sheet for lubricant, and one proof of warranty decal. The All Season lubricant is specifically formulated to protect and preserve the ingersoll rand t30 air compressor.

The internal factory part number/CCN for this T30 air compressor is 47812338001.

Ingersoll Rand 2545QE10 200v 3 Phase Enclosed Air Compressor System Features:

  • Noise enclosure that mitigates sound and reduces dust intake
  • 120 gallon ASME rated horizontal air tank
  • Integrated axial fan to reduce operating temperature
  • Durable cast-iron v-shape pump design
  • Ingersoll Rand T30 two stage pump - 175 PSI maximum operating pressure
  • Finned copper intercooler tube for cooler running temperatures
  • Pre installed and wired magnetic motor starter with on/off switch
  • Pressure switch unloader to prevent starting against head pressure
  • Air cooled aftercooler for moisture reduction
  • Low oil level shutdown switch for pump protection
  • Three Phase 200v power (3 phase compressor)
  • The best quiet piston air compressor on the market!
California Residents: Prop 65 WARNINGS
Products specifications
Drive StyleBelt Drive
Dimensions76 x 34.3 x 74"H
Sound Level65dBA
Horse Power10
Max Pressure (PSI)175
CFM @ 175 PSI35
Voltage208/3/60hz
PhaseThree
ConfigurationHorizontal
Tank Size120 Gallons
Weight1439 lbs