The GrindLazer HP DC89 G is part of Graco's High Production Series - this is a great choice for high production removal jobs including leveling, inlay, and all surface coating line removal. This uses a cutter drum that has a maximum width of 7" and has a cut rate of 600sq ft an hour. The DC89 G is powered with a 9hp Honda ProStart engine. The EasyGlide Wheel Mount System makes it as easy to use as a LineLazer, and its rugged, innovative design means you can count on it to perform for a lifetime of use.
Note: 25M992 is a bare system and does not include the necessary grinding blades. These can be purchased separately or all together in a package - please contact us for additional information.
TriBelt Drive System- 3-cog belt design optimizes power transfer and maximum load handling
- Eliminates costly downtime
DialDown Depth Control System- Easy Cutter Depth Control
- Easy to "dial down" for precise cutting depth control with multiple positions
InstaCut Technology- Ultimate Removal or Inlay Flexibility
- Only unit to offer "hands-on" engagement of the cutting deck system for up or down position
- Allows deck to "float" when on uneven surfaces No-tool system
Fat Track Front Swivel Wheel- Proven front caster wheel system makes turning fast and easy
- Maneuver curves better. No need to 'muscle' the Grindlazer when moving
EasyGlide Wheel Mount System- Front mounted caster along with dual rear pneumatic air-filled tires makes handling safe and easy to maneuver as a LineLazer
- Pneumatic air-filled tires helps eliminate vibration
Extreme-Duty ProStart System- Easy cutter start/stop with centrifugal clutch
- Easy to start in cold weather.
- Provides longer belt life and eliminates broken recoils
Available Cutters: (25M992 does not include cutters. These are the available ones for this machine. Contact us for pricing)- Wire Brush - Wire brushes are ideal for removing curing compounds and cleaning surfaces without damaging the substrate. Graco offers wire brushes for both drum and rotary equipment.
- Steel Star - Ideal for gentle removal, provides deeper penetration of substrate
- Steel Beam - Ideal for gentle removal
- Carbide Flail - Ideal for removing paint and epoxy markings, surface leveling, and removing trip hazards
- Carbide Flat - These versatile cutters use a flat carbide pin to strip, mill, and clean concrete and asphalt surfaces
- Carbide Tipped Miller - Millers scrape the surface to remove markings, making them a suitable choice for removing paint, epoxy, tape, and thermoplastic
- Full Carbide Miller - Similar to carbide-tipped millers, but cast entirely from carbide for a longer service life
- Carbide Pick - Available for drum and rotary scarifiers, carbide picks are ideal for applications requiring aggressive removal of thick coatings or material
More info on the types of Graco GrindLazer cutters available here.
| Air Filter Type | Cyclone |
|---|
| Cut Direction | Forward |
|---|
| Cutter Drum Diameter (in) | 7 |
|---|
| Cutter Type | Drum |
|---|
| Depth Adjustment | Manual |
|---|
| Engine Brand | Honda |
|---|
| Engine Model | GX270 |
|---|
| Engine Size (HP) | 9 |
|---|
| Engine Start Type | ProStart |
|---|
| LineDriver Required | Optional |
|---|
| Maximum Cut Rate (ft2/hr) | 600 |
|---|
| Maximum Cut Rate w/ LineDriver (ft2/hr) | 1300 |
|---|
| Maximum Cut Width (in) | 8 |
|---|
| Model | GrindLazer |
|---|
| Product Series | High Production |
|---|
| Type | Concrete Scarifier |
|---|
| Vacuum Port | Yes |
|---|
Graco 
Chicago Pneumatic 
Ingersoll-Rand 
Titan Tool, Inc. 
BE Pressure Supply Inc. 
Rol-Air 
Pneumatech 
Summit Lubrication 
BEKO Technologies 
Legacy FlexZilla 
COXREELS 
Milton Industries 
Belair Technologies LLC 
Parker-Hannifin Corporation 
Powerex 
RapidAir 
Eaton 
Miscellaneous 
SPX Hankison 
Binks 
Wagner / Spray Tech CapSpray 
Campbell Hausfeld 