Atlas Copco 1630091800 OEM Roto Inject Fluid NDURANCE Compressor Oil – 20 Liters, 1630 0918 00

Atlas Copco 1630091800 OEM Roto Inject Fluid NDURANCE Compressor Oil – 20 Liters, 1630 0918 00

Atlas Copco 1630091800 is a 20-liter container (5.2 gallons) of genuine Roto Inject Fluid NDURANCE mineral-based compressor oil. This oil was most commonly used on the Atlas Copco GA and GX oil-injected rotary screw compressors. Its optimized viscosity and specialized additive package provide dependable lubrication for rotors, bearings and gears while working in harmony with the compressor’s internal components.

This is authentic Atlas Copco lubricant—not aftermarket oil, relabeled bulk lubricant, or a generic oil advertised as a compatible replacement. It is specifically formulated for Atlas Copco GA and GX oil-injected rotary screw compressors.

Roto Inject Fluid NDURANCE offers strong resistance to oxidation, corrosion and deposit formation. A consistent lubricating film helps prevent metal-to-metal contact, while effective water separation helps keep moisture out of the oil circuit. The oil’s low-foaming and demulsifying properties also support proper oil separation, efficient compressor operation and reliable performance in dusty or humid industrial environments. 

When used under mild operating conditions and maintained according to Atlas Copco recommendations, Roto Inject Fluid NDURANCE can provide a service interval of up to 4,000 operating hours or one year, whichever occurs first.

Features and Benefits: Atlas Copco 1630 0918 00 / 1630091800 Roto Inject Fluid NDURANCE

• Genuine Atlas Copco OEM lubricant: Not an aftermarket or generic substitute.
• 20-liter container: Factory packaging for convenient compressor maintenance and oil changes.
• Up to 4,000-hour service interval: Provides extended service life of up to 4,000 operating hours or one year under mild ambient conditions.
• High oxidation resistance: Helps slow lubricant breakdown and supports longer drain intervals.
• Anti-wear protection: Maintains a protective oil film over rotors, bearings, gears, and other critical components.
• Improved sealing properties: Helps seal the clearances between rotors during the compression process.
• Deposit and sludge control: Helps reduce contamination, lacquer, and sludge within the oil separator, valves, and oil circuit.
• Water separation: Separates readily from water to help keep moisture out of the compressor’s lubrication system.
• Corrosion protection: Helps protect internal metal surfaces from rust and moisture-related corrosion.
• Low-foaming formulation: Promotes efficient separation of air from the lubricant and helps prevent pressure loss across the separator.
• Reduced oil carryover: Low-volatility mineral base oil helps reduce lubricant consumption compared with typical mineral compressor oils.
• Optimized viscosity: Provides proper oil-film strength across a wide range of normal compressor operating conditions.