Summit Syngear SH-10068 ISO-68 Synthetic Gear Lubricant for High Load Industrial Grade Applications

$0.00
SKU: SH-10068
Part #: SH-10068
Call to order 800-542-8300
Give us a call or click "Request for Quote" below for pricing or additional information

Summit Syngear SH-10068 ISO-68 Synthetic Gear Lubricant for High Load Industrial Grade Applications

Summit Syngear SH-10068 gear lubricant is designed for high load equipment usage that requires an ISO 68 viscosity. SH-10068 is an industrial grade gear oil is recommended for use in piston or gear-type pumps, especially where pressures exceed 1000 psi or when operating over a wide temperature range.

Summit Syngear SH-1000 Series gear lubricants are formulated with synthetic base stocks and fortified with select additive systems to enhance their exceptional performance.  The PAO base fluid used has outstanding oxidation and thermal stability, naturally high viscosity index and excellent low temperature pumpability and fluidity.  The unique additive system used provides increased oxidation stability, extreme pressure properties, and maximum protection against wear, rust, corrosion and foaming.

In today's world of efficiency improvements, there has been much emphasis placed on reducing energy requirements for equipment used in plant operations. Summit Syngear synthetic gear lubricants have proven to reduce friction, there-by reducing the input power to operate the equipment or increasing the available power output.  The reduction of fluid friction results in lower lubricant operating temperatures, prolonging the life of both the lubricant and the equipment.  The additive system used in this product not only reduces frictional drag, but also protects gears against failures associated with heavy loading and meets the requirements of U.S. Steel 224 specification, AGMA 9005-D94 specification, DIN 51517 Part 3 CLP specification and API GL-4 Gear Service Category. 

Benefits:
  • Meets API GL-4 for scuffing protection against high peak loads, vibrations, and oscillations
  • Intended for lubrication of heavily loaded spur, bevel, and planetary gears
  • Good compatibility towards NBR and FKM sealing materials
  • Excellent oxidation resistance extends relubrication intervals
  • Good high temperature stability (284˚ F upper service temperature)

Summit SH-10068 synthetic gear oil is available in the following container sizes. Please contact us for pricing. The internal Summit product code for this item is 340126.

  • 55 Gallon Drum
  • 5 Gallon Pail
  • 1 Gallon Container (must order in quantities of 6)
  • 1 Quart Container (must order in quantities of 12)

Physical Properties - SH-10068 Synthetic Gear Oil

  • ISO Grade: 68
  • AGMA Number: 2 EP
  • Viscocity @ 40ºC: 67.1
  • Viscosity Index: 130
  • Specific Gravity: .859
  • Pour Point, Fº: -44
  • Flash Point, Fº: 480
  • Copper Corrosion: 1A
  • Rust Test: Pass
  • Timken OK, lbs: 65
  • Four Ball Welds, kgs: 200
  • Four Ball Scar, mm: .30
  • FZG Gear Test: 12+ Pass

Summit SH-10068 will work great with the following lubricants and is cross-compatible:

Benz OilSyn-Tech PAO  68
Castrol Industrial N.A. div. BPOptigear BM   68
Castrol Industrial N.A. div. BPIsolube EP 3460 (68)
Citgo Petroleum Corp.Citgear Synthetic  EP 68
Gulf Oil LPGulfSyn EP Gear   68
Kost USAAchievAL SynGear EP  68
Lubrication Engineers, Inc.1602 Duolec
LubriplateSyn Lube HD 680
Royal Purple, LLC.Synergy   68
Royal Purple, LLC.Thermyl-Glyde   68
Schaeffer Mfg. Co.167 Moly Syn Gear Lube  68
Shell Oil CompanyOmala S4 GX  68 (Omala HD 68)
TOTAL Lubricants USA, Inc.Carter SP   68
Tulco / Lubsoil4068 Synthetic Gear Oil
Ultrachem, Inc.Omnigear EP  68
Ultrachem, Inc.Ultrachem EP  68
California Residents: Prop 65 WARNINGS