Square D 9013FHG42J55M1X Air Compressor Pressure Switch, 110-150psi, On off Lever and Unloader, .25"

Square D 9013FHG42J55M1X Air Compressor Pressure Switch, 110-150psi, On off Lever and Unloader, .25"

The 9013FHG42J55M1X air compressor pressure switch is manufactured by Square D. This switch includes an on/off lever to control the air compressor. 9013FHG42J55M1X is pre-set to turn on at 110psi and turn off at 150psi. An unloader line is pre-installed on the side of the pressure switch to relieve head pressure. This connects with a single 1/4" NPT female port.

9013FHG42J55M1X is part of the Square D Nema Pressure Switches range.

This air compressor pressure switch has 2 normally closed, snap action, DPST-DB (double pole single throw, double break) form YY contacts. The pressure switch has a built in pressure sensor to tell the compressor when to turn on and off. The pressure setting is adjustable betweet 100-200 psi and has a 40psi pressure differential. It is furnished with screw clamp terminals for electrical connection and 0.25inch NPSF internal for fluid connection. The enclosure is made of polypropylene. It is an IP20 and NEMA 1 rated. This product is certified by CE, CSA and UL. Meets UL 508 standards.

9013FHG42J55M1X Specifications

• Default factory pressure setting: 110-150psi
• Rated Voltage: 115, 230, 208/3, 230/3, 460/3, 575/3
• Adjustable Minimum Close Cut In: 100psi
• Adjustable Maximum Open Cut Out: 200psi
• Pressure Differential Range: 40psi
• Rated for 1phase and 3 phase applications.
• Can be used with or without a magnetic motor starter
• Motor HP Max on 115v - 1.5hp (see note below)
• Motor HP Max on 230v/1ph - 2hp (see note below)
• *Note - This pressure switch can be used with any horse power compressor motor if a magnetic motor starter is used on your compressor. Since the full load amp draws is ran through the magnet motor starter, only a small control signal is sent to the pressure switch. Therefore the motor HP rating on this switch is no longer relevant.

9013FHG42J55M1X user benfits

• Rugged, robust construction provides a long life and provides years of uninterrupted, worry-free service
• Feature drift proof cut-in and cut-out settings
• It has visible vertical contacts, easy to inspect without removal
• An extra strong frame that resists distortion when mounting the switch to a compressor
• Designed for the direct control of motors in compressor applications