Square D 9013FHG-42J59M1X Air Compressor Pressure Switch, 135-175psi, On off Lever and Unloader, .25"

Square D 9013FHG-42J59M1X Air Compressor Pressure Switch 135-175psi, On off Lever and Unloader, .25"

The 9013FHG42J59M1X air compressor pressure switch is manufactured by Square D. This switch includes an on/off lever to control the air compressor. 9013FHG42J59M1X is pre-set to turn on at 135psi and turn off at 175psi. An unloader line is pre-installed on the side of the pressure switch to relieve head pressure. This connects with a single 1/4" NPT female port.

9013FHG-42J59M1X is part of the Square D Nema Pressure Switches range. This air compressor pressure switch has 2 normally closed, snap action, DPST-DB (double pole single throw, double break) form YY contacts and off at 175psi pressure setting value. The pressure switch with a pressure sensor size of 200psi, an adjustable range on rising pressure of 100psi to 200psi and approximate fixed differential of 40psi. It is furnished with screw clamp terminals for electrical connection and 0.25inch NPSF internal for fluid connection. The enclosure is made of polypropylene. It is an IP20 and NEMA 1 rated. This product is certified by CE, CSA and UL. Meets UL 508 standards.

9013FHG42J59M1X Specifications

• Default factory pressure setting: 135-175psi
• Rated Voltage: 115, 230, 208/3, 230/3, 460/3, 575/3
• Adjustable Minimum Close Cut In: 100psi
• Adjustable Maximum Open Cut Out: 200psi
• Pressure Differential Range: 40psi
• Rated for 1phase and 3 phase applications.
• Can be used with or without a magnetic motor starter
• Motor HP Max on 115v - 1.5hp (see note below)
• Motor HP Max on 230v/1ph - 2hp (see note below)
• *Note - This pressure switch can be used with any horse power compressor motor if a magnetic motor starter is used on your compressor. Since the full load amp draws is ran through the magnet motor starter, only a small control signal is sent to the pressure switch. Therefore the motor HP rating on this switch is no longer relevant.

9013FHG42J59M1X user benfits

• Rugged, robust construction provides a long life and provides years of uninterrupted, worry-free service
• Feature drift proof cut-in and cut-out settings
• It has visible vertical contacts, easy to inspect without removal
• An extra strong frame that resists distortion when mounting the switch to a compressor
• Designed for the direct control of motors in compressor applications