OEM Replacement V-Belt for Ingersoll Rand 2545K10 and 2545E10 Reciprocating Compressors - 95100178
95100178 is a belt will work on the Ingersoll Rand 2545 compressors that are paired with a 10hp motor. This is an OEM drive belt from Ingersoll Rand.
Checking belt tension should be done monthly depending on the compressor usage, especially if looseness is suspected. A quick check to determine if adjustment is proper may be made by observing the slack side of the belt for a slight bow when the unit is in operation. If a slight bow is evident, the belt is usually adjusted satisfactorily. These should be proactively replaced on a 2 year basis to ensure the compressor runs optimally. Your belt should be replaced if you are hearing squeaking sounds coming from the back of the beltguard. A compressor that is not producing the same amount of airflow as it previously did may be a sign of a belt wear. Belt tensioning can be achieved by loosening the motor anchor screws, pushing the motor away from the pump, and retightening the motor anchor screws. The motor can be easily moved by placing a prying tool beneath it.
95100178 will work for the following air compressor models: