The Ingersoll Rand 32499626 discharge tube goes from the outlet of the 2475 compressor pump to the check valve that is connected at the center of the topplate on the receiver tank. This is a copper tube with reverse flared fittings on each side. This tube was common on the Ingersoll Rand 2475N7.5 and 2475N5 compressors.
Please note that there are several different discharge tubes used on these compressors over the years. This tube comes off the high pressure side of the pump and has an "S" bend with two 90ยบ curves on it. Please contact us for confirmation this will fit your 2475 compressor if you are not positive it's correct.
32498065
38436721
32170979
32188450
32301533
