Graco 243103 Pump Armor Airless Paint Sprayer Storage, 1 Quart

Graco 243103 Pump Armor Airless Paint Sprayer Storage Fluid, 1 Quart

(same as Magnum Pump Armor - 243104)

Graco Pump Armor helps to eliminates damage due to corrosion during long-term storage. Fill your pump and leave until you use your sprayer again. Graco Pump Armor is also freeze - proof to -30° F. This is an excellent solution to maximize your investment and extend the lifespan of your. Graco Pump Armor can be used diluted in 20% water for daily cleaning after usage and can be used undiluted for long term storage and antifreeze.

Need to purchase in bulk? Consider the 245133 - 1 gallon of Graco Pump Armor.

• Specially formulated to protect the airless pump during long term storage
• Virtually eliminates damage due to corrosion
• Freeze-proof to -30 degrees F
• Use full strength for maximum corrosion protection
• Wide-mouth bottle conveniently fits most pump intake tubes - No waste!
• Minimal evaporation ensures prolonged protection
• Non-flammable

How to use Graco Pump Armor

1. Completely clean pump with compatible solvent (use warm soapy for waterbase, thinner for solvent base.)
2. Relieve pressure and open prime valve
3. Place pump inlet into Pump Armor bottle
4. Fill fluid section with Pump Armor (cycle pump slowly until you see Pump Armor come out of prime return tube)
5. Remove hose and cap outlet fitting. Leave Pump Armor bottle under pump inlet to seal the system
6. Relieve pressure and close prime valve before storage
7. After storage - thoroughly flush sprayer with water and dispose of Pump Armor in accordance with local regulations.