1312100736 OEM Replacement V-Belt for Chicago Pneumatic and BelAir Compressors

1312100736 OEM Replacement V-Belt for Chicago Pneumatic and BelAir Compressors

This 1312100736 belt will work on several models of the Chicago Pneumatic RCPC gas drive and electric air compressors. This was most commonly used on the RCPC1630G but will also work with their 10hp models as well.

Checking belt tension should be done monthly depending on the compressor usage, especially if looseness is suspected. A quick check to determine if adjustment is proper may be made by observing the slack side of the belt for a slight bow when the unit is in operation. If a slight bow is evident, the belt is usually adjusted satisfactorily. These should be proactively replaced on a 2 year basis to ensure the compressor runs optimally. Your belt should be replaced if you are hearing squeaking sounds coming from the back of the beltguard. A compressor that is not producing the same amount of airflow as it previously did may be a sign of a belt wear. Belt tensioning can be achieved by loosening the motor anchor screws, pushing the motor away from the pump, and retightening the motor anchor screws. The motor can be easily moved by placing a prying tool beneath it.

The 1312100736 v-belt will work with the following reciprocating air comrpessors:

• Chicago Pneumatic RCP-C1630G
• Chicago Pneumatic RCPC10123VS
• Chicago Pneumatic RCPC10123VS4
• Chicago Pneumatic RCPC10123V
• Chicago Pneumatic RCPC10123V4
• Chicago Pneumatic RCPC10123HS
• Chicago Pneumatic RCPC10123HS4
• Chicago Pneumatic RCPC10123H4
• Chicago Pneumatic RCPC10123H
• BelAir 6G3HV