Graco Airless Sprayer Tip Sizes

RAC X Latex	RAC X Fine-Finish	RAC X WideRAC
RAC 5	LineLazer RAC 5	Heavy Duty RAC
RAC IV	Contractor Flat Tips	Fine Finish Flat Tips

Also see
Tip Sizing
Tips on Tips
RAC X Tips

Graco RAC X SwitchTips

Order Graco RAC X LTX tips

The blue RAC X Switch tips are designed for spraying latex paint in residential, commercial or industrial applications and are original equipment on new Graco Contractor series sprayers. This versatile tip will spray lacquers to mastics and are the highest performing, longest lasting airless pray tips in the industry. With a RAC X Guard they can be used on virtually all modern airless sprayers with a 7/8" threaded gun.
LTX and tip size - LTXxxx such as LTX517

	Orifice size - inches (thousandths)
Fan Size	.007	.009	.011	.013	.015	.017	.019	.021	.023	.025	.027	.029	.031	.033	.035	.055
2-4		109	111		115
4-6	207	209	211	213	215	217	219	221					231		235
6-8		309	311	313	315	317	319	321	323	325	327	329	331		335
8-10		409	411	413	415	417	419	421	423	425	427	429	431	433	435	455
10-12		509	511	513	515	517	519	521	523	525	527	529	531	533	535
12-14			611	613	615	617	619	621	623	625	627	629	631	633	635
14-16								721	723			729
16-18						817		821			827

Flow Rate (gpm)		.09	.12	.18	.24	.31	.38	.47	.57	.67	.77	.90	1.03	1.17	1.31
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315

Graco RAC X Fine Finish SwitchTips

Order Graco RAC X FineFinish

The green Fine Finish tips are made for finish work such as cabinetry, woodwork, metal. designed to be used with lacquers, varnishes, urethanes and other fine-finish materials. The pre-orifice in these tips produce finer atomization which results in a finer finish. Requires RAC X HandTite guard.
FFT and tip size - FFTxxx such as FFT412

	Orifice size - inches (thousandths)
Fan Size	.008	.010	.012	.014
2-4	108	110	112
4-6	208	210	212	214
6-8	308	310	312	314
8-10		410	412	414
10-12		510	512	514
12-14			612	614

Flow Rate (gpm)	.07	.11	.15	.21
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .010 orifice and a 8 in (203 mm) pattern, order FFT410

Graco WideRAC SwitchTips

Shop Graco WideRAC tips

WideRAC tips are for high production and for use in larger sized airless sprayers. Great for new construction, large concrete and block surfaces. Sprays an extra wide 24" fan pattern. Requires RAC X HandTite guard.
WR and tip size - WRxxxx such as WR1225

	Orifice size - inches (thousandths)
Fan Size	.021	.023	.025	.027	.029	.031	.033	.035	.037	.039
24	1221	1223	1225	1227	1229	1231	1233	1235	1237	1239

Flow Rate (gpm)	.47	.572	.77	.90	1.03	1.17	1.31	1.47	1.63	.90
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .027 orifice and a 24 in (610 mm) pattern, order WR1227

Graco RAC 5 SwitchTips

Order Graco RAC V tips

The black RAC 5 tips come in the widest variety of sizes and are the most common as they were standard equipment on Graco sprayers for many years. Sizes for spraying lacquers to mastics and everything in-between. They are the #1 selling airless tip on the market. Fits RAC 5 Guard (aka RAC V) and RAC IV too.
286 and tip size - 286xxx such as 286415

	Orifice size - inches (thousandths)
Fan Size	.007	.009	.011	.013	.015	.017	.019	.021	.023	.025	.027	.029	.031	.033	.035
2-4		109	111	113	115		119	121
4-6	207	209	211	213	215	217	219	221	223	225					235
6-8	307	309	311	313	315	317	319	321	323	325	327		331
8-10		409	411	413	415	417	419	421	423	425	427	429		433	435
10-12		509	511	513	515	517	519	521	523	525	527	529	531	533	535
12-14		609	611	613	615	617	619	621	623	625	627	629	631	633	635
14-16								721	723	725		729			735
16-18					815	817	819	821			827		831	833	835
18-20						917									935

Flow Rate (gpm)		.09	.12	.18	.24	.31	.38	.47	.57	.67	.77	.90	1.03	1.17	1.31

Table Continued...

	Orifice size - inches (thousandths)
Fan Size	.039	.043	.045	.051	.055	.063	.065
2-4
4-6
6-8
8-10	439	443		451	455
10-12		543			555	563
12-14			645		655		665
14-16
16-18
18-20

Flow Rate (gpm)	1.63	1.98	2.17	2.79	3.25	4.26	4.53
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315

Graco LineLazer RAC 5 SwitchTips

Purchase Graco LineLazer tips

These yellow tips are specifically designed for line stripping machines. Creates clean, laser-sharp lines with no fuzzy edges. Sprays heavy water-based to thin alkyd traffic paints. Fits the orange RAC5 tip guard.
LL5 and tip size - LL5xxx such as LL5319. Fits RAC 5 Guard (aka RAC V) and RAC IV too.

	Orifice size - inches (thousandths)
Fan Size	.013	.015	.017	.019	.021	.023	.025	.027	.029	.031	.033	.035	.039	.055
2	213	215	217	219
4		315	317	319	321	323	325	327	329	331	333	335		355
4-8			417	419	421	423	425	427	429	431		435
8-12					621	623	625	627	629	631		635	639

Flow Rate (gpm)	.18	.24	.31	.38	.47	.57	.67	.77	.90	1.03	1.17	1.31	1.63	3.25
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315

See LineLazer Tip Selection Guide

Graco Heavy Duty RAC SwitchTips

Order Graco XHD tips

These gray handled heavy-duty tips can be used with virtually all paints and coatings - solvent and water-based. These tips are anchored with a screw in the heavy duty guard, which prevents tip loss. Use where vibration is a factor, situations where tip loss would be a problem such as on bridges. Requires the Heavy Duty RAC Tip Guard.
XHD and tip size - XHDxxx such as XHD625

	Orifice size - inches (thousandths)
Fan Size	.007	.009	.011	.013	.015	.017	.019	.021	.023	.025	.027	.029	.031	.033	.035
2-4	107	109	111	113	115	117	119	121				129
4-6		209	211	213	215	217	219	221		225	227	229	231		235
6-8	307	309	311	313	315	317	319	321	323	325	327	329	331	333	335
8-10		409	411	413	415	417	419	421	423	425	427	429	431	433	435
10-12		509	511	513	515	517	519	521	523	525	527	529	531	533	535
12-14		609	611	613	615	617	619	621	623	625	627	629	631	633	635
14-16			711	713	715	717	719	721	723	725	727	729	731	733	735
16-18				813	815	817	819	821	823	825	827	829	831	833	835
18-20									923		927		931	933	935

Flow Rate (gpm)		.09	.12	.18	.24	.31	.38	.47	.57	.67	.77	.90	1.03	1.17	1.31

Table Continued...

	Orifice size - inches (thousandths)
Fan Size	.037	.039	.041	.043	.045	.047	.049	.051	.053	.055	.057	.059	.061	.063	.065	.067	.069	.071	.075	.081
2-4		139
4-6		239
6-8	337	339	341	343	345	347	349	351		355
8-10	437	439	441	443	445	447	449	451		455			461	463	465	467		471	475	481
10-12	537	539	541	543	545	547	549	551	553	555	557		561	563	565	567		571	575
12-14	637	639	641	643	645	647	649	651		655	657	659	661	663	665	667	669	671	675
14-16	737	739	741	743		747	749	751	753	755			761	763		767		771
16-18	837	839	841	843		847	849	851		855			861	863		867
18-20	937	939

Flow Rate (gpm)	1.47	1.63	1.8	1.98	2.17	2.37	2.58	2.79	4.26	3.25	3.49	3.75	4.0	4.26	4.53	4.82	5.11	5.41	6.04	7.04
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order GHD315

Graco RAC IV Reverse-A-Clean Tips

Buy Graco RAC IV tips

RAC IV tips were the first airless tip to stand out from the rest. These are still OEM on the Magnum series sprayers. These fit the RAC 5 guard and the selection is small, you may use the RAC 5 tips above.
We now have many of the common sizes in stock, and are currently discounted to $18.95
Fits RAC IV and RAC 5 Guard (aka RAC V) too.
221 and tip size - 221xxx such as 221415

	Orifice size - inches (thousandths)
Fan Size	.011	.013	.015	.017	.019
6-8	311	313
8-10	411	413	415	417
10-12			515	517	519
12-14					619

Flow Rate (gpm)	.12	.18	.24	.31	.38
221xxx (odd) Example - for a .011 orifice and a 6 inch fan pattern, order tip 221311

Graco Contractor Flat Tips

Order Graco Flat tips

Flat tips were the original airless paint sprayer tips but many still use and prefer them. These tips cost less but are much harder to clean and spray a similar quality fan to RAC V tips. As they are harder to clean they should be used only with clean, strained and filtered materials and may not be appropriate when changing of tips is a nuisance such as on a ladder. When using these you should have several on hand. Fits Flat Tip Guard only.
269 and tip size - 269xxx such as 269515

	Orifice size - inches (thousandths)
Fan Size	.011	.013	.015	.017	.019	.021	.023	.025	.027	.029	.031	.035
4-6	211	213	215	217	219			225	227
6-8	311	313	315	317	319	321	323	325	327
8-10	411	413	415	417	419	421	423	425	427			435
10-12	511	513	515	517	519	521	523	525	527		531
12-14		613	615	617	619	621	623	625	627		631	635
14-16			715	717	719	721		725
16-18			815		819	821			827	829	831
18-20								925

Flow Rate (gpm)	.12	.18	.24	.31	.38	.47	.57	.67	.74	.90	1.03	1.31
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .011 orifice and a 10 in (203 mm) pattern, order 269511

Graco Fine Finish Flat Tips

Get Graco Fine-Finish Flat tips

These are a fine-finish version of the spray tips above and are made for finish work such as cabinetry, woodwork, metal. fits Fine Finish Flat Tip Guard only.
163 and tip size - 163xxx such as 163410

	Orifice size - inches (thousandths)
Fan Size	.008	.010	.012	.014	.016	.018	.020	.022	.024	.026	.028	.030	.032
2-4	108	110
4-6	208	210	212	214	216	218			224				232
6-8		310	312	314	316	318	320	322	324
8-10	408	410	412	414	416	418	420		424	426	428	430	432
10-12		510	512	514	516	518	520	522	524	526	528	530
12-14		610	612	614	616	618	620	622	624	626	628
14-16			712	714	716	718				726
16-18				814	816	818	820	822	824	826	828		832
18-20			912	914		918		922	924	926

Flow Rate (gpm)	.07	.11	.15	.21	.27	.35	.43	.52	.62	.73	.84	.97	1.1
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate Example: for a tip with a .010 orifice and a 10 in (203 mm) pattern, order 163510

Our most popular tip sizes based on sales are;

286517
286515
FFT310
286411
286413
LTX515
286415
286311
LTX517
FFT410
286211
FFT210
LTX415
FFT312
FFT412