Graco High Volume Low Pressure Sprayers maximize
performance and provide superior fine-finish
results. These HVLP sprayers offer excellent gun
control. They use high-performance turbines and
an efficient filtration system to provide
outstanding finish quality.
The three most common Graco HVLP sprayers are
the 2500, 3800, and 4900.
HVLP 2500
- Best for Dyes, inks, and
nonwiping stains
- Portable, 2-Stage turbine
- Foam prefilter protects main
filters from large incoming
particals
- Quick disconnect with ball valve
at gun
|
 |
HVLP 3800
- Best for automotive finishes,
stains, epoxies, lacquers, enamels,
urethanes and varnishes
- Portable, three-stage turbine
provides greater air output for
heavier materials
- Warning light indicates when
filters need to be cleaned
- Foam prefilter protects main
filters from large incoming
particals
- Automotive-style main filter has
large surface area for high cleaning
efficiency, resulting in longer
turbine life
- Quick disconnect with ball valve
at gun – no tools necessary
|
 |
HVLP 4900
- Best for industrial finishes,
oil and wall paints, latex and
multispec
- Portable, four-stage turbine
provides highest air output for the
heaviest materials
- Two-speed capability reduces
turbine air flow allowing for better
control with lighter materials
- Warning light indicates when
filters need to be cleaned
- Foam pre-filter protects main
filter from large, incoming
particles - easy to clean and
replace
- Automotive-style main filter has
large surface area for high cleaning
efficency, resulting in longer
turbine life
- Quick disconnect with ball valve
at gun and at sprayer – no tools
necessary
|
 |
| Graco Also produces the 3800 and
4900 ProComp, which have the same
specifications as their counterpart, but
feature an on-board compressor. |
Graco FinishPro 390 & 395
How it works:
Material is delivered to the gun at
lower pressure than traditional airless
(500-1500 psi vs. 1500-3000 psi) and is
partially atomized through a small tip.
Full atomization is achieved by adding a
small amount of air (5-35 psi) to the
edges of the spray fan – resulting in a
softer pattern, more control, higher
transfer efficiency, and less overspray.
Benefits:
• Fine finish quality that rivals HVLP
• High production speed of airless
• Ability to spray the widest range of
fine finish materials – without
reducing!
A full 8 air outlets instead of 4!
Graco’s Exclusive Air Cap Design
• Revolutionary air cap design has been
optimized for use with
reversible spray tips
• Twice the number of air outlets, each
positioned closer to
the spray tip
• Delivers a softer, more consistent
spray fan from start to finish
Premium G40 Spray Gun -
Allows you to spray stains, enamels, varnishes, lacquers,
sealers, and other finishing materials
at lower pressures in air-assisted
airless mode, resulting in an
exceptional finish AND spray a full
range of paints, primers, and other
heavier materials in airless mode
• Light-weight, compact design is ideal
for getting into tight areas
• Ultra-light trigger pull and
form-fitted handle means less fatigue
for the user
• High Pressure Swivel for improved
operator
control and comfort
• Closely aligned air and material
hose porting and FlexCoil™ air hose
provides increased flexibility while
spraying
|
 |
 |
|
